Description

36″ x 36″ Roll-Up Super Bright™

Reflective Xpress Program 36″ x 36″ Roll-Up Super Bright™ -Up sign comes with Four (4) Lexan Corner Pockets and 5/16″ x 1/4″ fiberglass battens (ribs).

• Roll-Up Super Bright™ Meets MUTCD specifications. Meets ASTM D 4956 specifications for Type VI, Class 5 retroreflective sheeting
  

  Made in America

36″ x 36″ Roll-Up Super Bright™ Roll–Up Signs

Flexible Roll–up sign blanks made from fabric reinforced microprismatic retroreflective sheeting. These sign blanks are suitable for fabrication of retroreflective roll–up construction, maintenance, and incident management signs that meet the requirements of the Manual on Uniform Traffic Control Devices (MUTCD)

36″ x 36″ Roll-Up Signs shall have the minimum coefficient of retroreflection shown in Table 1when tested in accordance with ASTM E810, “Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry

Super Bright Roll–Up Signs meet the flexibility requirements of ASTM D4956, section 6.7and S2.2.2. They are sufficiently flexible such that through continuous use, setup and storage, the signs do not show any permanent creasing or delaminating

Super Bright Roll–Up Signs consist of a high gloss, transparent, uv–stabilized microprismatic retroreflective layer bonded to a heavy–duty fiber–reinforced vinyl material. The Roll–Up sign provides high brightness and long–term color and fluorescenceretention. This construction will not delaminate,provides outstandingdurability, legibility, and long sign life.

Ambient Temperature: After conditioning a sample of sealed Roll–Up sign for 24 hours at 73° ± 3°F (23° ± 2°C)and 50% relative humidity, subject the sheeting to an impact of a 4 lb (1.82 kg) weight with a 5/8” (16 mm)rounded tip dropped from a 100 in–lb(11.3 N–m) setting on a Gardner variable impact tester, IG–1120, as per ASTM D4956, section S2.2.1. The sheeting shall show no cracking or delaminationoutside the actual area of impact

Additional information